承办单位
2021深圳国际点胶喷涂自动化及焊接展览会-办公室

快速连接
   如何前往会场 酒店住宿
   关于签证 资料下载

联系我们

电话
(86-21) 3478 0939

E-mail
yinuo_zl@163.com

您现在的位置:首页 > 新闻媒体 > 行业新闻 > >行业新闻

行业新闻

自动点胶机助力三星手机导入屏幕自动化组装

 时 间:2020-11-06

传出三星电子从2019年起将让智能手机的手机屏组装进一步自动化,欲减少手机屏幕组装成本的80%。所有2019年新上市的智能型手机皆会以这种方式生产。自动化制程所需的机台设备由Protec独家供应。据报导,三星电子从2019年开始全面自动化智能型手机的屏幕组装制程,包括即将举行发表会的Galaxy S10系列与中低价位手机产品皆会全面适用。
 
Samsung Electronics will further automate smartphone screen assembly from 2019 to reduce the cost of screen assembly by 80%. All new smartphones coming on the market in 2019 will be made in this way. Protec is the sole supplier of machine equipment for automation process. It is reported that Samsung Electronics has started the screen assembly process of fully automated smartphones since 2019, including the upcoming Galaxy S10 series and low and medium price mobile phone products.
 
 
自动点胶机
先前三星电子在显示面板与手机机壳黏贴的过程,采用人工以薄的双面胶带真接给予固定,为了将这项制程改为自动化,三星特别改用液态黏着剂取代双面胶带。喷出液态黏着剂的自动点胶机设备由南韩上市公司Protec独家供应,将用于三星电子全球各地的智能型手机工厂。
 
Samsung Electronics used a thin double-sided adhesive tape to fix the display panel and mobile phone shell. In order to automate the process, Samsung specially used liquid adhesive instead of double-sided adhesive tape. The automatic dispensing machine, which sprays liquid adhesives, is exclusively supplied by Protec, a South Korean listed company, and will be used in smart phone factories around the world of Samsung Electronics.
 
据了解,三星电子曾希望向多家供货商同时采购自动点胶机,但Toptec最近涉嫌泄漏三星显示器3D压膜机技术的商业机密,因此从供货商名单被排除。三星电子虽然紧急提出设备需求,但Toptec赶不上交货时间,因此最后由Protec单独承揽。Protec已在1月28日与三星电子签订规模约163亿韩元(约1450万美元)的供应合约。南韩业界预测,2019年三星电子将会需要约500台的自动点胶机,2019年上半Protec应会对三星出货大部份机台。
 
It is understood that Samsung Electronics had hoped to purchase automatic dispensing machines from several suppliers at the same time, but Toptec was recently excluded from the list of suppliers because it was suspected of leaking commercial secrets of Samsung Display 3D film press technology. Although Samsung Electronics urgently put forward equipment requirements, Toptec could not catch up with the delivery time, so it was finally contracted by Protec alone. Protec has signed a supply contract with Samsung Electronics on Jan. 28 for about 16.3 billion won ($14.5 million). South Korean industry predicts that Samsung Electronics will need about 500 automatic dispensing machines in 2019, and Protec will ship most of the machines to Samsung in the first half of 2019.
 
Protec表示,使用自动点胶机进行固定可将边框缩小到最少,也可降低黏贴过程的不良率;预估2019年点胶机与分类机等用于行动装置生产的事业营收可比2019年提高30%。三星电子将屏幕组装全面自动化后,可大幅减少人事支出,粗估减少幅度约80%。因此三星电子舍得在这部分的机台进行大规模投资。但相较于苹果或其他中国大陆手机业者在多年前就开始使用点胶机组装,三星导入自动化的速度算慢。Protec卖给三星电子的点胶机先前已有大量对美国、中国地区客户交货的成绩,机器设备质量备受肯定。

 
2021深圳国际点胶喷涂自动化及焊接展览会-组委会
公司电话:021-3478 0939
公司邮箱: yinuo_zl@163.com
展会官网:www.szasexpo.com
关于展会 展商中心 合作媒体 观众服务 新闻媒体 论坛会议 商旅服务 联系我们
Copyright 2021深圳国际点胶喷涂自动化及焊接展览会 版权所有